Welcome to the Forum

This is your "Welcome to the Forum Post". We created this forum for you. A place to discuss your successes, your challenges, your questions and ideas. BulletSeeker is designed to help you achieve the results you are striving for. So the more you are involved the better we improve. We share in your

Hello and good morning to all forum members, my name is adi. I have been using the BS 4 since November 2022 on the following sporting weapons: 1. Unique Alpine TPG-1 / 300 Win Mag. In the absence of a picatinny rail, the BS 4 was mounted on a small tripod. 2. Unique Alpine UPG-1 / .308 Win with B

During the recent Webinar, a problem was mentioned about the device loosing detections as the shot string progressed. I have experienced this, and this picture shows my at range fix. Simply use a rubber band to apply a little rearward pressure to the adapter if the thumb screw loosens a bit. This

I often use a device known as Pressure Trace II (PTII for short). It also uses a BlueTooth interface between the PTII and my Windows PC. When I connect to my my SpeedTracker (ST for short) I find that either the ST becomes intermittent, or the PTII becomes intermittent, or both become intermitten

I purchased a bulletseeker from bulletseeker.com.au in september 2022 . I was very happy with the unit . I used it for 4 calibres from 6 creedmoor to 308 and over 20 matches of 12 -20 shots it only missed 2 shots. There was some problems with the USB C port and it was fiddly to recharge but otherwis

I have been using the beta version for IOS for 2 months without issues . Last week I updated to the new software . this worked well and I liked the ability to add images. Last week I also did the IOS update to 16.1.1 on an iphone 13. On the weekend I shot 3 string of 15 . The shots were recorded

Hey Everyone, have we got a treat for you!! Thanks to an Independent Research Group (IRG) we are able to share some definitive data on how the BULLETSEEKER has been performing. This testing was performed in the USA several weeks ago and was just released. It was a completely independent testing g

Shooting suppressed and not having good results. Pretty sure it’s the positioning of the Bulletseeker. Have the parabolic thing coming, but looking to shoot without it. Any suggestions?

Hi, My Bullet Seeker it's not powering down and continuously on both green lights, also it will not connect to my Bluetooth (no other Bluetooth devices are on or in the surrounding area ). Any help on this I've sent you an email as well and tried to phone you it's not very good as I've spent £800 pl

After a couple of attempts I found a best position for this rifle. Make : ASH from Bavaria Type : Valkyrie Magnum, chambered in .338LM Position : Either 10:00 or 02:00 clock position, approx. 6 cm from the axis of the cannon and approx.30 cm from the suppressor. I used a 45 degree angle picatinny-mo

• Add standard deviation, extreme spread, and average velocity for the whole string in the text output of the xlsx export function • Under Strings > Statistics, add extreme spread • Under Home, while the chronograph is connected, add extreme spread • Add option to import/export backup data to Google

This chronograph is a huge quality of life improvement over the magnetospeed v3 I was using previously. I got a Sylvan Arms 3 slot QD picatinny to mlok adapter (https://sylvanarms.com/product/qd-picatinny-3-slot-rail-mount/) and it makes moving the chronograph between my rifles a lot faster and mak

Loving this device but for the love of god, please create a summary table for the strings. I spend more time cleaning up the data so I can just take the average velocities and put into my barrel journal in excel than actually shooting. It makes the data export almost useless. It's how Labradar does

Hi everyone, I just test the speed tracker and no problems with mid size calibers, both attached to picatinny rail in the rifle or in the bore with an elastic band. When I tested with my .204 Ruger it didn’t reply any measure. I know is small and fast but with current load I know is below 4000 fps t

We are excited to share this new forum as an extension of the original. SPEEDTRACKER is all things equal to Bulletseeker. Keep following here to see the latest information and news on the products that are introduced by Sekr-Tek. Coming in 2023 there will be new improved options for speed tracking p

I took the opportunity this afternoon to see how the BulletSeeker would cope with 9mm when attached to the pic rail of my Tanfoglio Match 3. It managed to pick up 99% of shots when shooting in a slow deliberate manner, which is what you want when looking for M/V data. Double taps..............nup di

We recently had a request regarding a carbon fiber rifle barrel. This type of material behaves differently from other metals when interacting with a radar. This type of material absorbs radar signals. So when using a rifle with carbon fibre components, finding that sweet spot just means you have to

Hi Bulletseeker TS team, Is it possible to help with following questions? 1. Is there a maximum number of strings that can be created in BS App (android version) (before the App starts having performance issues)? 2. Is there a maximum number of shoots that can be recorded and saved within one string

will the bullet seeker work in a tunnel range? i have a 100m range thats lined with timber and is only 800mm x 800mm cross section. i have blast chamber immefiately in front of barrel. thought i could mount bullet seek in front of blast chamber about 150mm below bullet trajectory thanks in advance

Hey BULLETSEEKER users, we have been slowly compiling a list of equipment that people are using the BULLETSEEKER on. This is by no means comprehensive and there definitely more gun and ammunition options out there. If you have something to add, feel free to jump on the chat and share. Another idea,

Please see the screenshot. I have not been able to establish why this comes up, but it is very confusing. It shows a red 'Connected' but at the same time a 'Connecting' message, which does nothing if touched. Using a Samsung Galaxy S10 5G phone (SM-G977B) and the application V6.4.2 Also, during a

Hi all, Just updated to Speed Tracker App from the original Bullet Seeker App. Velocity value is partly hidden. Anyone else have this issue? Android version.

UPDATE*** 11APRIL2023 NEW Speedtracker APP is “Almost” ready to go. Yes, you read that correctly. We have some IT issues with the APP developers and are working quickly to address this. 😁 GOOD NEWS - iOS is working on the new Speedtracker M4 App. There are no connectivity issues. 🙂 LESS GOOD

Hello, Does anyone have an excel template (possibly with a macro) to import each string of BulletSeeker Data and generate comparison graphs? Specifically, I'm looking for load development data analysis similar to what's created by ChronoPlotter (ChronoPlotter.com). I've already reached out to th

Hello Klara, Hello Members I'm Adi Späh, living in Germany, Yesterday I tested for the very first time my new BS with my HK Mark 23 on a 25m Range. I wasn't sure, that BS could detect the Bullets sittung on the short Picatinny rail underneath the barrel. Plan b was a little tripod with a selfmade a

Thank you to everyone that had the time to participate in the Technical Webinar. For those that did not, here is the video recording. We also have the audio recording if that's more your speed. You will find that there are details of what a doppler chronograph is and how the BULLETSEEKER is differ

After reading the app manual it seems that its not capable of calculating the BC of a fired bullet, this should be possible based on the down range velocities and some other data like air pressure and humidity Is this a hidden feature or is it planned to add this feature?

Thank you all for your patience and willingness to take the extra steps when using an APPLE mobile device with your BULLETSEEKER. We are so excited to let you know that the iOS Gods have released the MACH 4 BULLETSEEKER App publicly onto the APP Store. Just search BULLETSEEKER and then get started!

How does one replace the internal battery and what is the battery life expectation please ?

Have just taken delivery of a Bulletseeker. It seems link to my smartphone / app with no issues - the lights etc all do the right things and all is connected however, each time I shoot I am not getting any readings? I have tried differing locations for the bulletseeker but am still drawing a blank.